+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: good evening!!! Jake brake question (/showthread.php?tid=8199)
good evening!!! Jake brake question - jjoshthomas074 - 05-02-2022
engine ser# 79147134
cm870 435st
code that comes up every time #2366
i have a engine warning light when activating the jakes!
i got to reading a little in quickserv and noticed on a 2 solenoid system #1 isn't used. does this mean something in the ECM programming is wrong?? Considering im getting this code!!
both jake solenoids ohm 9.5-10
jake harness was just replaced the pass threw connector was getting oil soaked.
5v at all 3 pins at rocker box connector.
Thankyou for your time and input!
RE: good evening!!! Jake brake question - MommaBurt - 05-04-2022
According to the ESN you gave it should have a 2 engine brake file in it. If it has a 3 engine brake file in it then yes, it will throw that fault code.
RE: good evening!!! Jake brake question - jjoshthomas074 - 05-04-2022
What would be the best way to check and resolve the programing?? Cummins Dealer?
RE: good evening!!! Jake brake question - MommaBurt - 05-06-2022
Yeah, the easiest way is to hook your engine to insite and see what the ECM code is. We can tell you from there if it is the right file or not.
RE: good evening!!! Jake brake question - jjoshthomas074 - 05-07-2022
ECM ser# 26043299
is this what your referring too? if not i can hook up to it tomorrow and get you what your asking for! thankyou for the help.
RE: good evening!!! Jake brake question - MommaBurt - 05-09-2022
No, the ECM code will be displayed at the top of Insite next to the serial number. It will be an ABxxxxx number.
RE: good evening!!! Jake brake question - MommaBurt - 05-09-2022
If you need help PM me.