+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Pete & KW related Help... (/forumdisplay.php?fid=70)
+--- Thread: 2019 Pete 389 floor lights (/showthread.php?tid=8513)
2019 Pete 389 floor lights - Luckyjayb - 10-25-2022
Is there a way to turn on, and keep on when the truck is running, to 2 footwell lights under the brake valves that come one with the dome lights when the doors are open? I don’t have a switch for them and can’t find any info anywhere.
RE: 2019 Pete 389 floor lights - Bengy88 - 10-25-2022
Next to running your own switched circuit to them there isnt
RE: 2019 Pete 389 floor lights - Luckyjayb - 10-26-2022
(10-25-2022 )Bengy88 Wrote: Next to running your own switched circuit to them there isnt
I didn’t think so. I even went into the parameters on paccar esa. I knew some of the older ones had a switch in there but not seen it on the newer ones
RE: 2019 Pete 389 floor lights - Papa_Buck - 10-26-2022
My Kenworth has that option. The dome light switch is a 3 position switch. Off, floor lights under the center console and dome lights. Either way, get a 3 position switch to replace your dome light switch and wire in as many lights as you like
RE: 2019 Pete 389 floor lights - Bengy88 - 10-26-2022
Not a bad idea
RE: 2019 Pete 389 floor lights - Luckyjayb - 10-28-2022
Not a bad idea but there isn’t a dome switch in mine. Works off the door jamb switch.