+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: SPN 108 FMI 2 isx 2350 (/showthread.php?tid=8599)
SPN 108 FMI 2 isx 2350 - Philroy - 12-02-2022
Demandated isx2350 SPN 108 FMI 2 indicated one of the pressure sensors just not sure which one. What one should I start with?
RE: SPN 108 FMI 2 isx 2350 - Rawze - 12-03-2022
isn't that a fault for the barro sensor intermittent signal?. -- cummins Fault code 295?.
bad barro sensor or wiring to it?
I know that it checks it against the exhaust manifold pressure sensor before engine start.... so you should ensure that sensor is fairly new and its feed-circuit thru the thermostat housing is not blocked up too.