+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Isx Cm871 Injector leak test (/showthread.php?tid=9418)
Isx Cm871 Injector leak test - BC77 - 02-15-2024
Hello all. I preformed a injector leak test on my Isx. I got some air bubbles by cranking the motor and baring over the motor on the front actuator representing injectors 1, 2 and 3. The bubbles were between B and C indicating injector 1 is leaking. When I switched over to the back actuator representing injectors 4, 5 and 6 and preformed the test again, I got air bubbles while cranking the motor but none when I bared the motor over at least 6 complete revolutions. The air bubbles were very few on both test. Anyone have any ideas or suggestions? Can the air bubbles be caused by anything other than a leak?
Is there another way to perform an injector cut out test without having the software or do I need the computer to do it?
Thanks for any and all help.
RE: Isx Cm871 Injector leak test - Rawze - 02-16-2024
CM570/870/871 ...
If the overhead valves were out of adjustment, you can get some false positives.
RE: Isx Cm871 Injector leak test - BC77 - 02-19-2024
Thanks for the info, what program do you recommend for doing an injector cut out test?
RE: Isx Cm871 Injector leak test - Rawze - 02-19-2024
(02-19-2024 )BC77 Wrote: Thanks for the info, what program do you recommend for doing an injector cut out test?
http://rawze.com/forums/showthread.php?tid=7747&pid=67948#pid67948