+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: Oil in breather tube (/showthread.php?tid=9719)
Oil in breather tube - 3406E - 09-12-2024
Saw signs that little droplets of oil is coming out of my my breather tube. I also have moderate blow by nothing crazy.How serious is this ? Cm870 800+k miles.
RE: Oil in breather tube - tree98 - 09-12-2024
Time for an inframe soon at 800k and blowing oil........sorry to say
RE: Oil in breather tube - Rawze - 09-12-2024
More than 1 gallon of oil consumption on a CM870 every 4k miles or so is too much.
RE: Oil in breather tube - hhow55 - 09-13-2024
Super Tech Gear Lubricant SAE 85W-140, 1 Gallon Bottle
This should help slow down the oil consumption a little.
RE: Oil in breather tube - 3406E - 09-13-2024
(09-12-2024 )tree98 Wrote: Time for an inframe soon at 800k and blowing oil........sorry to say
Planning to get a inframe by January hopefully if holds out.
RE: Oil in breather tube - 3406E - 09-13-2024
The price on rebuilding is expensive though, the infame kit is 7k was 5k 1 year ago ridiculous.I think everything is going to run up to 30k when finished?
RE: Oil in breather tube - tree98 - 09-13-2024
(09-13-2024 )3406E Wrote: everything is going to run up to 30k when finished?
Yep and have it done at haggai's or it will end up being done twice I guarantee it!!! Nobody out there does these ISX's right.
RE: Oil in breather tube - 3406E - 09-13-2024
Yes Haggai is where I’m going definitely. Already spoke to them