+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: Where can I get a new ECM for my engine? (/showthread.php?tid=979)
Pages: 1 2
Where can I get a new ECM for my engine? - preacherboy24 - 10-08-2016
I am thinking my ECM is going full retard. I am considering buying a new one but dont want to support the psychic dealer network. I see them on Ebay but I dont trust them. Just wondering if anyone got a good deal on a new one. Also looking to get a new head too. Most places I am working with say they cant get one.
RE: Where can I get a new ECM for my engine? - Pro Star Cummins - 10-08-2016
Preach, sometimes you got to bight the bullet and go to the Beast
(Cummins Dealer ) at least you might have a warranty ?
Roll the dice on junk yard one and your out the money.
I bought a new one and kept my old one to learn on.
I'll swap out if and when we trade truck in.
My 1/2 cent thinking
RE: Where can I get a new ECM for my engine? - preacherboy24 - 10-08-2016
There is an engine rebuilder in Indiana off rt20 that sold a Cummins certified reman kit to a buddy of mine for around $5k. The dealer in my area wanted over $8k. I'm thinking the profit margin is pretty big at some shops. Maybe someone got a good ecm at a reasonable price. Just checking the water before I jump in.
RE: Where can I get a new ECM for my engine? - Pro Star Cummins - 10-08-2016
Preacher, can't blame you, I payed 1,000.00 +400.00
Core charge. I didn't know much about computers and
Still learning , we had to keep rolling and The Men (Rawze and Gearhead )
Kept us on the road and I can't thank them enough.
RE: Where can I get a new ECM for my engine? - preacherboy24 - 10-08-2016
(10-08-2016 )Pro Star Cummins Wrote: Preacher, can't blame you, I payed 1,000.00 +400.00
Core charge. I didn't know much about computers and
Still learning , we had to keep rolling and The Men (Rawze and Gearhead )
Kept us on the road and I can't thank them enough.
was that a new ecm?
RE: Where can I get a new ECM for my engine? - schISM - 10-08-2016
Hey preacher boy, I might still have an ecm I bought of eBay a few years ago for an ism, pretty sure it would work on a N-14. I had to use one on my N-14 celect + in a pinch and it had one heck of a lope at idle but I had Cummings reprogram it and never looked back. If ya want I can try and locate it.
RE: Where can I get a new ECM for my engine? - preacherboy24 - 10-08-2016
(10-08-2016 )schISM Wrote: Hey preacher boy, I might still have an ecm I bought of eBay a few years ago for an ism, pretty sure it would work on a N-14. I had to use one on my N-14 celect + in a pinch and it had one heck of a lope at idle but I had Cummings reprogram it and never looked back. If ya want I can try and locate it.
I have an ISX CM870
RE: Where can I get a new ECM for my engine? - morrison8 - 10-08-2016
Preacher Boy, If you have a cm870 the ecm should have a part number of 3684009
If so I have one used but working good let me know.
RE: Where can I get a new ECM for my engine? - preacherboy24 - 10-08-2016
(10-08-2016 )morrison8 Wrote: Preacher Boy, If you have a cm870 the ecm should have a part number of 3684009
If so I have one used but working good let me know.
Send me a PM and let me know how much you want. Its an '05 engine so it should work.