+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: 3/4 torque wrench (/showthread.php?tid=995)
3/4 torque wrench - simon999 - 10-11-2016
Im looking to get 100-600lbs torque wrench that would be good when replacing wheel seals, torque lug nuts. There are bunch of cheap chineese in the market. Also cdi torque wrench is popular
https://amzn.to/2LlPUKZ
What are your opinions?
RE: 3/4 torque wrench - Hammerhead - 10-11-2016
I have an inexpensive Jet Tools one for the road, and that looks just fine to me.
Not nearly enough tire shops properly torque lug nuts, so you're a mile ahead just for doing it!
It will make doing your own wheel seals easy and reassuring knowing you've set them properly.
RE: 3/4 torque wrench - hhow55 - 10-11-2016
This one served me well..
https://amzn.to/2VC0Wzy
RE: 3/4 torque wrench - Rawze - 10-12-2016
I have a local OTC tool dealer up the road from me. This is the one i have..
https://www.otctools.com/products/accutorq-tm-clikker-34-torque-wrench
or someone could go digital...
https://amzn.to/2VC0Wzy