Dash DPF gauge |
10-19-2019, (Subject: Dash DPF gauge ) Post: #10 | |||
| |||
RE: Dash DPF gauge That's what I was figuring that the differnital pressure sensor was telling the ECM and the ECM would say what to display. I thought if it was a more accurate reading it would be a nice feature. Not necessarily needed just another gauge to display how things were doing. User's Signature: 2015 Kenworth T660 | |||
10-19-2019, (Subject: Dash DPF gauge ) Post: #11 | |||
| |||
RE: Dash DPF gauge The digital gauge in the Paccar Smartnav just mirrors the “soot load” parameter broadcast. You can find the same in Insite. | |||
10-19-2019, (Subject: Dash DPF gauge ) Post: #12 | |||
| |||
RE: Dash DPF gauge I have a Scangauge D, programmed the X-Gauges to read off the Detroit One-Box. I can read DPF in/out/differential pressures. Inlet and outlet NOx sensor readings, DOC in and out temperatures, DPF out temperature, SCR temperatures. Low and high pressure fuel lines. | |||
|
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.