| Won't Rev past 1500rpm |
| 10-20-2020, (Subject: Won't Rev past 1500rpm ) Post: #10 | |||
| |||
| RE: Won't Rev past 1500rpm Thanks, I ordered the Inline-6 Adapter etc. but as Rawze said, it was a programming issue, I switch the ECM on my brother's truck and it did the same thing. I put his own on my truck and it rev properly, everything was ok. Thanks for all the help guys. | |||
| 10-21-2020, (Subject: Won't Rev past 1500rpm ) Post: #11 | |||
| |||
| RE: Won't Rev past 1500rpm sounds like a bad delete. like other have said, drop those cans and make sure they are all (DOC, DPF and, if applicable, SCR) 100% empty inside. It's not enough to have some hole drilled in there and if any of the cans are not hollowed out then you will end up with problems. and of course that programming needs to be fixed, by someone who actually knows what they are doing! User's Signature: "...And as we wind on down the road, Our Shadows taller than our Soul..." | |||
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.