|     Trailer axle seals short life    |  
|    08-08-2018, (Subject: Trailer axle seals short life )   Post: #19   |  |||
 
  |  |||
 RE: Trailer axle seals short life  (08-08-2018 )Redland1 Wrote: ... Don't know about others but if I had an axle or hub get hot enough to worry if it is synthetic or not, the type of oil would be the least of my concerns. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.  |  |||
 
  | 
|    08-08-2018, (Subject: Trailer axle seals short life )   Post: #20   |  |||
 
  |  |||
|  RE: Trailer axle seals short life    My company had a couple seals replaced on my tractor when I picked it up. They failed about 6 or 7 months later. I found out they never cleaned the spindle where the seal rides and it was rusty.  I always clean it off, take off the rust with crocus cloth, clean again and then lightly prelubricate, then be sure to properly set the preload. I have no more issues from mine. I run stemco nuts. I found the instructions a bit vague so I called them. The instructions vary depending if you use the OEM cone as well, so you might want to call to verify. User's Signature: 2010 T2000, CM871, 13spd, 1.173m, tanker yanker Overhauled @ 927k  |  |||
 
  | 
|    « Next Oldest | Next Newest »    |  
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

 
