Question rockers quickserve
11-05-2018, (Subject: Question rockers quickserve ) 
Post: #1
Question rockers quickserve
My serial 79366535. On option view RL-17939-06. Diagram shows three rockers 22, 27, and 28. Are these position specific on the shaft or ??? Do I order 2 of each for front/rear shaft? Thanks
./uploads/201811/post_3119_1541442538_f560fc39a60bcda5cae5d62957f3a51c.png


User's Signature: 2011 Prostar Cummins 871
replyreply
11-05-2018, (Subject: Question rockers quickserve ) 
Post: #2
RE: Question rockers quickserve
I don't have my invoice handy and can't quickserve on this pc, but I'm pretty sure 27 & 28 are intake/exhaust and 22 is jake. Page should show req. quantity?
replyreply
 Thanks given by: DosGatos
11-05-2018, (Subject: Question rockers quickserve ) 
Post: #3
RE: Question rockers quickserve
(11-05-2018 )Nostalgic Wrote:  I don't have my invoice handy and can't quickserve on this pc, but I'm pretty sure 27 & 28 are intake/exhaust and 22 is jake. Page should show req. quantity?
Right. Wasn't looking at the quantity required. 22 is intake front, 27 exhaust rear, 28 intake rear. 18 is exhaust front.
Thanks


User's Signature: 2011 Prostar Cummins 871
replyreply
11-05-2018, (Subject: Question rockers quickserve ) 
Post: #4
RE: Question rockers quickserve
I do remember being confused on that page when I ordered my injector rockers... I just ended up calling and telling them what I needed instead of calling with part numbers.
replyreply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.