| Exhaust manifold leak |
| 04-19-2017, (Subject: Exhaust manifold leak ) Post: #1 | |||
| |||
| Exhaust manifold leak I just noticed this leak. Any insight appreciated. | |||
| 04-19-2017, (Subject: Exhaust manifold leak ) Post: #2 | |||
| |||
| RE: Exhaust manifold leak Here's another pic. | |||
| 04-19-2017, (Subject: Exhaust manifold leak ) Post: #3 | |||
| |||
| RE: Exhaust manifold leak Valve seal, I have had this type of leak and fixed them twice already. | |||
|
| 04-19-2017, (Subject: Exhaust manifold leak ) Post: #4 | |||
| |||
| RE: Exhaust manifold leak What's the labor look like on a valve seal? | |||
| 04-19-2017, (Subject: Exhaust manifold leak ) Post: #5 | |||
| |||
| RE: Exhaust manifold leak I wouldn't have a number for you since I did it mostly myself, but I would say 3-5 hours labor including an overhead set if you choose to do so. You're looking at $20 in parts 4 seals and injector o-rings per clyinder. The spring compressor tool runs about $400 tho. | |||
|
| 04-19-2017, (Subject: Exhaust manifold leak ) Post: #6 | |||
| |||
| RE: Exhaust manifold leak Thanks for the information. I appreciate it. | |||
| 04-19-2017, (Subject: Exhaust manifold leak ) Post: #7 | |||
| |||
| RE: Exhaust manifold leak No problem good luck! | |||
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.