871 actuators
11-12-2018, (Subject: 871 actuators ) 
Post: #1
Star 871 actuators
Replaced 1 fuel and 1 timing actuators chase an idle surge when cold and just after getting off the freeway and parking.

Metering looked ok apart some scoring on the part that goes into coil.

But timing had a piece stuck to the plate 1/2. Piece shown in picture. Also scoring/polishing on this one to

So is this piece suppose to seperate also I could spin the round part in the magnet plate


Attached File(s)Thumbnail(s)
   
replyreply
11-12-2018, (Subject: 871 actuators ) 
Post: #2
RE: 871 actuators
the picture in this thread should help...
http://rawze.com/forums/showthread.php?t...619#pid619

The little round piece on yours looks really worn out.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
11-12-2018, (Subject: 871 actuators ) 
Post: #3
RE: 871 actuators
1037000miles
replyreply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.