High fuel rail pressure.

[Rcac842]

(02-24-2025 )Rawze Wrote:  

(02-24-2025 )Rcac842 Wrote:  They are going to remove the head ☹️ but better to be safe than sorry. It’s already looking like a rebuild

WHY????... WHAT MORONS!!!... PULL THE GODD$AMN INJECTORS AND BOROSCOPE IT FIRST !!!!...

A boroscope and bottom end inspection will reveal anything wrong internally. Take it apart just to look and it might be a HUGE waste of moneys. Sure, there is a chance that it may need to be rebuilt due to internal damage,. ... but never make blind-man assumptions like that.


and if the head has to come off it.. then it will need a full inframe simply due to disturbing everything. Here is how it should be done.. no less... and good luck finding someone willing to do it 100% right.. because most mechanics are nothing but speed-gun happy hacks!.
ref: http://rawze.com/forums/showthread.php?t...6#pid70606

Thanks I’ll call them tomorrow and have them do that first. Is any blow by ok? It was spitting out some oil nothing crazy. No smoke