Threaded Mode | Linear Mode

BlackiceT800 · 03-16-2016, **(Subject: Pyro gauge )**

Does anyone know a make and model pyro gauge that fits nicely in the blank hole on a kenworth dash with the newer interior?

Thanks

Nilao · 03-16-2016, **(Subject: Pyro gauge )**

What I put in my prostar. Had to use a hole saw to enlarge it a hair as the opening needs to be 2 1/16" and mine would catch on the ring they use to mount the cap.

https://www.amazon.com/gp/aw/d/B0095YDMM...tow+gauges

Nilao · 03-16-2016, **(Subject: Pyro gauge )**

Gauges in action.

Rawze · 03-16-2016, **(Subject: Pyro gauge )**

Teh glowshift gauges i mention in my install video fits them very well.

Waterloo · 03-18-2016, **(Subject: Pyro gauge )**

I think a VDO pyro 2" gauge would match up nicely with what you have in your dash. That is what I am running, looks darn close to what you photographed. http://www.amazon.com/VDO-310153-Electri...+pyrometer

Isx Lover · 03-18-2016, **(Subject: Pyro gauge )**

I put a Tel-Tek digital gauge in my 2008 KW fit in perfectly and came with sensor and leed.

BlackiceT800 · 03-18-2016, **(Subject: Pyro gauge )**

Thank you very much guys now I have options

barf · 04-03-2016, **(Subject: Pyro gauge )**

Nilao; I have that same gauge! Now that I have it, I find that it's useless having both analog and digital. I only look at the digital. The analog might have been useful if it read some different function, like boost for example.

For mounting, I found this really useful:
http://www.ebay.com/itm/Black-2-52mm-UNI...1380400103