| Max Jake boost ... |
| 06-13-2018, (Subject: Max Jake boost ... ) Post: #1 | |||
| |||
| Max Jake boost ... Alright time for my dumba$$ question. What should your max boost on a 871 be when jaking hard , high rpms . Oh and on a "fixed " 871 , hehe . I know that they will Spike and then drop back down a bit and the higher the rpm is the higher your boost will be . But what should your max not exceed once it settles out . I greatly appreciate all the knowledge. User's Signature: The missing link | |||
| 06-14-2018, (Subject: Max Jake boost ... ) Post: #2 | |||
| |||
| RE: Max Jake boost ... ~ i think mine is usually around 18 ish? -- Too much boost and you could drop a valve at higher rpm's. -- The factory settings + correct program for your make/model truck for the engine brake should only ever be used. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
| 06-23-2018, (Subject: Max Jake boost ... ) Post: #3 | |||
| |||
| RE: Max Jake boost ... This may be off track a bit but on CM2250 mine is around 32-35 psi at manifold. | |||
|
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.