871 actuators |
11-12-2018, (Subject: 871 actuators ) Post: #1 | |||
| |||
871 actuators Replaced 1 fuel and 1 timing actuators chase an idle surge when cold and just after getting off the freeway and parking. Metering looked ok apart some scoring on the part that goes into coil. But timing had a piece stuck to the plate 1/2. Piece shown in picture. Also scoring/polishing on this one to So is this piece suppose to seperate also I could spin the round part in the magnet plate | |||
11-12-2018, (Subject: 871 actuators ) Post: #2 | |||
| |||
RE: 871 actuators the picture in this thread should help... http://rawze.com/forums/showthread.php?t...619#pid619 The little round piece on yours looks really worn out. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
11-12-2018, (Subject: 871 actuators ) Post: #3 | |||
| |||
RE: 871 actuators 1037000miles | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.