| Fault code 559 |
| 02-13-2019, (Subject: Fault code 559 ) Post: #1 | |||
| |||
| Fault code 559 So we just added a t680 to the fleet, it has an ISX, and my driver said it loses power at highway speeds. I plugged in INSITE and I got a fault code 559 injector metering rail 1 pressure data valid but below normal operating range moderately severe level. How can I go about troubleshooting the source. Does INSITE have a way of showing me the current real time pressures going thru the fuel system? I changed fuel filters already and I still get the code. I’m going to check the fuel pump tomorrow, but I’ve heard the is very hard to pinpoint. Any one else have this problem or is there a thread about fault code 559 already? | |||
| 02-13-2019, (Subject: Fault code 559 ) Post: #2 | |||
| |||
| RE: Fault code 559 User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
| 02-13-2019, (Subject: Fault code 559 ) Post: #3 | |||
| |||
RE: Fault code 559 (02-13-2019 )Rawze Wrote: http://rawze.com/forums/showthread.php?t...9#pid30649 Where do I measure the psi of the fuel. Is there a test that I can preform with insite. And what should I look for during any test or measured readings | |||
| 02-14-2019, (Subject: Fault code 559 ) Post: #4 | |||
| |||
RE: Fault code 559 (02-13-2019 )castillon11011 Wrote:(02-13-2019 )Rawze Wrote: http://rawze.com/forums/showthread.php?t...9#pid30649 User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.