|     Grease Tube Keeper - A Hack    |  
|    08-13-2019, (Subject: Grease Tube Keeper - A Hack )   Post: #1   |  |||
 
  |  |||
|  Grease Tube Keeper - A Hack    Here's a little hack. :blush:    I searched the Internets all over for a canister to hold a single, opened tube of grease. For years, I've been using discarded zip tie tube for this. It keeps the inside of my outbox clean. I thought for sure there must be an inexpensive, ready-made solution but if there is, wherever it is, I couldn't find it. Next, I thought about making something out of PVC pipe. But 2 inch pipe was too small and 3 inch pipe was just too big. I think 2 1/2 inch pipe would have been great, but neither Home Depot or Lowes had it locally. Then it came to me. What about a spaghetti keeper? Well, here it is. ![]() This one came from Amazon. I paid $13.99 for a two-pack. https://amzn.to/2Z1dG0f It's a small thing, but I really like it. Just thought I'd share.  |  |||
 
  | 
|    08-13-2019, (Subject: Grease Tube Keeper - A Hack )   Post: #2   |  |||
 
  |  |||
|  RE: Grease Tube Keeper - A Hack    You don't just leave the tube in the gun ?     |  |||
|    08-13-2019, (Subject: Grease Tube Keeper - A Hack )   Post: #3   |  |||
 
  |  |||
|  RE: Grease Tube Keeper - A Hack    If he's like me he has one open for 5th wheel grease   User's Signature: 2010 Lonestar - CM871 - 13sp - 3.70s, 2016 T680 - cm2350 - 13sp - 3.36s - skateboarder  |  |||
 
  | 
|    08-13-2019, (Subject: Grease Tube Keeper - A Hack )   Post: #4   |  |||
 
  |  |||
|  RE: Grease Tube Keeper - A Hack    i prefer red-line for high-end stuff...  https://amzn.to/2H4kGDs and the northern tool brand or wd-40 el-cheapo for the rest. https://amzn.to/31ygfsn User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.  |  |||
 
  | 
|    08-13-2019, (Subject: Grease Tube Keeper - A Hack )   Post: #5   |  |||
 
  |  |||
| RE: Grease Tube Keeper - A Hack | |||
|    08-13-2019, (Subject: Grease Tube Keeper - A Hack )   Post: #6   |  |||
 
  |  |||
 RE: Grease Tube Keeper - A Hack  (08-13-2019 )Lonestar10 Wrote: If he's like me he has one open for 5th wheel grease I use gear oil for my 5th wheel most of the time... less messy. Sometime I do use grease, so I just pop the end open and squeeze the whole tube flat with my hands then use the flattened tube to spread it around, then throw it away. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.  |  |||
 
  | 
|    08-13-2019, (Subject: Grease Tube Keeper - A Hack )   Post: #7   |  |||
 
  |  |||
|  RE: Grease Tube Keeper - A Hack    Yea, it's for 5th wheel grease. This is the old container the new one is replacing.   ![]() I've never used a whole tube at once, thus the need for a container, but I'll defiantly try the gear oil out now that you've mentioned it, Rawze. Thanks.  |  |||
|    08-13-2019, (Subject: Grease Tube Keeper - A Hack )   Post: #8   |  |||
 
  |  |||
|  RE: Grease Tube Keeper - A Hack    Might be much to keep in truck but this is very slick to use!   https://rover.ebay.com/rover/0/0/0?mpre=...2041668375 User's Signature: Born and raised in Vyskonsin on milk, cheese, bread, and beer!  |  |||
 
  | 
|    08-13-2019, (Subject: Grease Tube Keeper - A Hack )   Post: #9   |  |||
 
  |  |||
 RE: Grease Tube Keeper - A Hack  (08-13-2019 )Rawze Wrote: i prefer red-line for high-end stuff...Thought it was one tube but I see that it's a case. Nevermind  |  |||
|    « Next Oldest | Next Newest »    |  
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

 


  