2350 fuel rail decay

[Lonestar10]

well idk what resealed means unless its new orings or something but i would guess either the feed tube wasnt installed right or those injectors are internaly fubar.

[Jokerone33]

Update
I changed out #2 and #6 injector tan decay test and it dropped about 3-500 psi in 3 min so that is fixed but I still need to figure out how to get the program pulled out so I can get it sent over to Rawze to be gone over so I know what I’ve got good bad or indifferent but I’m not super savy with the computer lol

[snailexpress]

(03-12-2020 )Jokerone33 Wrote:  Update
I changed out #2 and #6 injector tan decay test and it dropped about 3-500 psi in 3 min so that is fixed but I still need to figure out how to get the program pulled out so I can get it sent over to Rawze to be gone over so I know what I’ve got good bad or indifferent but I’m not super savy with the computer lol

Just friendly reminder, did you change injectors codes in Insite?

[Jokerone33]

(03-13-2020 )snailexpress Wrote:  

(03-12-2020 )Jokerone33 Wrote:  Update
I changed out #2 and #6 injector tan decay test and it dropped about 3-500 psi in 3 min so that is fixed but I still need to figure out how to get the program pulled out so I can get it sent over to Rawze to be gone over so I know what I’ve got good bad or indifferent but I’m not super savy with the computer lol

Just friendly reminder, did you change injectors codes in Insite?

Yes I did thanks

[SquareOne]

(03-13-2020 )snailexpress Wrote:  Just friendly reminder, did you change injectors codes in Insite?

^^ Such a legit question....when I first purchased my truck, not one injector code was correct after the engine was replaced.


----> The same 'mechanic' (lmao) also told me that 2250/2350 injectors were the same and could be interchanged if one were to fail...hmmmmmm

[Rawze]

(03-13-2020 )SquareOne Wrote:  ...
----> The same 'mechanic' (lmao) also told me that 2250/2350 injectors were the same and could be interchanged if one were to fail...hmmmmmm

not so at all.

[SquareOne]

(03-14-2020 )Rawze Wrote:  

(03-13-2020 )SquareOne Wrote:  ...
----> The same 'mechanic' (lmao) also told me that 2250/2350 injectors were the same and could be interchanged if one were to fail...hmmmmmm

not so at all.

Yep ^^, you explained that to me in detail when I was over at the compound last year upon first purchasing my truck.... Just a shame how many uninformed 'professionals' exist out there.

It's acceptable to be ignorant on a topic...ignorance can be repaired by educating oneself on the matter at hand. Now stupidity....thats a whole other discussion. 'You can't fix stupid' is displayed amongst many of those so called 'professionals' at other's expense...