|     Rod cap bolt torque    |  
|    03-27-2020, (Subject: Rod cap bolt torque )   Post: #1   |  |||
 
  |  |||
|  Rod cap bolt torque    What are you guys doing to get the “60 degrees” accurately [/font]for final torque on the rod cap bolts? 180 was easy enough to mark on the mains, but how did you accurately mark 60 degrees on the rod cap bolts?? Thanks   User's Signature: Anti-seize EVERYTHING, Except injectors...Use Petroleum Jelly!!!  |  |||
|    03-27-2020, (Subject: Rod cap bolt torque )   Post: #2   |  |||
 
  |  |||
|  RE: Rod cap bolt torque    60-degrees is the rotation of one flat-side to the next on a 6-point bolt head, or 2-flats on a 12-point bolt head.   User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.  |  |||
 
  | 
|    03-27-2020, (Subject: Rod cap bolt torque )   Post: #3   |  |||
 
  |  |||
|  RE: Rod cap bolt torque    perfect! thanks Rawze   User's Signature: Anti-seize EVERYTHING, Except injectors...Use Petroleum Jelly!!!  |  |||
|    « Next Oldest | Next Newest »    |  
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

 
