Gearbox Question |
07-26-2016, (Subject: Gearbox Question ) Post: #1 | |||
| |||
Gearbox Question I'm having a issue with a leak on gearbox. This is on my 09 PROSTAR. I was having issue with power steering so I loosened big nut on gearbox to see if maybe i have air in the system. I went to tighten that nut and now its dripping. Is there a gasket that goes there? Also that nut has a lil plastic thing in the middle. Any help appreciated. | |||
07-26-2016, (Subject: Gearbox Question ) Post: #2 | |||
| |||
RE: Gearbox Question Did you loosen the big nut on the pitman arm or was it a plug or is it leaking around the main shaft? The "plastic thing" in the middle may be a seal not a gasket. A picture is worth a thousand words. User's Signature: 2010 386 Pete CM871, 13 spd. 3.55 | |||
07-26-2016, (Subject: Gearbox Question ) Post: #3 | |||
| |||
RE: Gearbox Question Here's a pic. This is the backside of the gear box. | |||
07-28-2016, (Subject: Gearbox Question ) Post: #4 | |||
| |||
RE: Gearbox Question This looks like your bleed did you use socket or closed end on the wrench? If not you can mess up hollow fittings. There should be a oring or brass washer that seals under this. It could also be the plug for running duel steering boxes on heavy haul system. | |||
07-28-2016, (Subject: Gearbox Question ) Post: #5 | |||
| |||
RE: Gearbox Question It is to bleed system I believe. I used crescent wrench. Where would I find replacement nut, brass washer or o ring that is needed? International says they just sell kit for gearbox. What would you recommend Gearhead? Got a steady drip. | |||
07-28-2016, (Subject: Gearbox Question ) Post: #6 | |||
| |||
RE: Gearbox Question Is it a trw? | |||
07-28-2016, (Subject: Gearbox Question ) Post: #7 | |||
| |||
RE: Gearbox Question Says RH Sheppard on gearbox. I'll post pic. | |||
07-28-2016, (Subject: Gearbox Question ) Post: #8 | |||
| |||
RE: Gearbox Question This is gearbox. | |||
07-28-2016, (Subject: Gearbox Question ) Post: #9 | |||
| |||
RE: Gearbox Question http://www.rhsheppard.com/wp-content/upl...manual.pdf Lots of different models and applications for steering boxes. See if you can find a model# or even try searching the casting #. Only sure way is to search your VIN and build number. User's Signature: 2010 386 Pete CM871, 13 spd. 3.55 | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.