Cm871 hammering, poor thing

[txfarmer]

[attachment=7231]

[txfarmer]

   

[txfarmer]

Of course it’s upside down LOL about how my week has gone

[Nilao]

Well light scoring seems to be the norm. I think all my rollers and lobes have a line or two in them. And they've had them for a few hundred thousand miles.

[marek4792]

If it can't be felt with a fingernail it should be good

[txfarmer]

(10-24-2020 )marek4792 Wrote:  If it can't be felt with a fingernail it should be good

Thank both of you for your responses. I have spent more time researching wear in the cam and head in general. Going to inspect everything better again. Sounds like I will be okay to just run it.

[txfarmer]

Happy Halloween everyone.

Quick couple questions. I now have calterm, insite, and my inline6. Is there a YouTube tutorial on how to copy and send ecm file to Rawze? Or since I have the {name removed} sent me do I just upload that on my ecm? Is there a site or somebody I can pay to help me understand how to use and what program to use to accomplish this?

Thank you

[Rawze]

(10-31-2020 )txfarmer Wrote:  Happy Halloween everyone.

Quick couple questions. I now have calterm, insite, and my inline6. Is there a YouTube tutorial on how to copy and send ecm file to Rawze? Or since I have the {name removed} sent me do I just upload that on my ecm? Is there a site or somebody I can pay to help me understand how to use and what program to use to accomplish this?

Thank you

if u got CT then you should also have a couple docs on how to pull the file out of your ecm along with all that stuffs.

[txfarmer]

UPDATE.

Sorry it’s been awhile guys. We have it fixed.

The dampener fixed 100% of the rattle and hammering issues. Truck is SO much smoother. Mr Price from PA that Rawze recommended did my tuning. Like a new truck, thanks for everyone’s help!