Rear-End Gear Ratios |
10-19-2017, (Subject: Rear-End Gear Ratios ) Post: #28 | |||
| |||
RE: Rear-End Gear Ratios (08-05-2017 )marek4792 Wrote:(08-04-2017 )Rawze Wrote: Sounds to me like your trying to gear it around your bad driving habits. 6 mpg totally sucks and 70 mph beats the S$iut out of the truck.Well I mean you aren't wrong I like to run the speed limit and sometimes schedules dictate that. I do see where you are coming from though with the wear and tear though. It probably would be cheaper for me to do just to replace it with another 3.42 which the truck came with and then the power divider before it fails when I get back home. Thats what i was also wondering i have 11r24.5 3.55 rears and at 65mph rpms are at 1350 which i think is a little low but for some reason thats where i get the best mpg what would you guys recommend no less than 1400 rpm??? | |||
09-17-2021, (Subject: Rear-End Gear Ratios ) Post: #29 | |||
| |||
RE: Rear-End Gear Ratios I have a CM2350 is driving it at 1800 RPMS loaded or MT safe? At 1800 im at 64 mph. In 10th at 1500 im at 73mph . Too fast for me. 3.36 rears. | |||
09-18-2021, (Subject: Rear-End Gear Ratios ) Post: #30 | |||
| |||
RE: Rear-End Gear Ratios (09-17-2021 )amermextrucker Wrote: I have a CM2350 is driving it at 1800 RPMS loaded or MT safe? At 1800 im at 64 mph. In 10th at 1500 im at 73mph . Too fast for me. that's a terrible rear end ratio. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.