3225 computer issue
11-22-2019, (Subject: 3225 computer issue ) 
Post: #1
3225 computer issue
So I got this dam code I can’t get ride of. I bought a new purge valve installed plugged in insite did regen check engine light still on. And when I try to reset computer says the ecm adjustment can not be performed when engine is running. But it not running any ideas. I took off dozer and cleaned it up aswell


Attached File(s)Thumbnail(s)
   
replyreply
11-22-2019, (Subject: 3225 computer issue ) 
Post: #2
RE: 3225 computer issue
In Data Monitor, what does the reading for "Engine Operating State" say with the key on but engine off?
replyreply
11-23-2019, (Subject: 3225 computer issue ) 
Post: #3
RE: 3225 computer issue
Does the engine have any kind of delete or custom programming?

I have seen plenty of bad deletes or corruption make engine think its running when it is not.

Could also be a wiring issue, or the ECM needing an update on its software.

Also, what make/model/year truck and engine?


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.