Turbo testing...
02-26-2021, (Subject: Turbo testing... ) 
Post: #10
RE: Turbo testing...
So when you guys blocked the turbo and aired up the system you found the leak at the compressor, right? I’ll have to give that a try. Did you hear it back feeding through the compressor, or how were you able to verify the compressor was leaking?

If the compressor is the culprit would I notice that the compressed air system wasn’t performing as usual?


User's Signature: Anti-seize EVERYTHING, Except injectors...Use Petroleum Jelly!!!
replyreply
 Thanks given by: tree98
02-26-2021, (Subject: Turbo testing... ) 
Post: #11
RE: Turbo testing...
air hissing out the oil fill tube.

we narrowed it down by pressurizing the intake manifold side ...w as still there, then the compressor separately.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: JMBT , tree98
02-26-2021, (Subject: Turbo testing... ) 
Post: #12
RE: Turbo testing...
Thank you sir. I will be doing this test. It sounds like a more likely suspect then the turbo at this point.


User's Signature: Anti-seize EVERYTHING, Except injectors...Use Petroleum Jelly!!!
replyreply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.