Just did 2 injectors ran2 days now skipping

[Hammerhead]

(12-30-2016 )preacherboy24 Wrote:  Try Quickserve for the specs. It could be the bad injectors were letting combustion gases into the fuel rail and took out the other two injectors. You can get Quickserve for your phone. Just put in the engine serial number and you should be able to get the info you need right off your phone..... but if that doesnt work you can go online and get it off the website.

I'd do this. I agree with Rawze, I'm not a fan of torque plus angle method for the rocker shaft assemblies. The thread bores are too short and the bolts are not stretch type.
Shortcut: 70 ft/lbs is what I torque my rocker shaft bolts to...it's in the video. Credit where it's due, thanks Rawze. I've tried torque plus angle, and it feels like either the bolt or the head is about to break, scared the crap out of me!
Everyone needs to set up a Quickserve account and enter their ESN. Every single step by step is right there to dismantle your engine so no two parts are connected, and then put it back together again. Cummins does a pisspoor job of promoting this resource.
If you have:
- A Quickserve account
- An Inline connector with Insite
- A decent tool box
- A membership here for this resource
There is no need for a mechanic again! With those four simple things, the curtain has been pulled back and the shackles have been removed! You are free!

Unless I'm doing something wrong, the Quickserve mobile app only shows parts not procedures. I use the online version to access procedures.