cummins x15

[Running rough]

Yes, it's not that it's short on power but the plan is to go to a lot bigger implement that is a lot heavier in some steep hills its probly not a bad idea to try and be ready ahead of time before spring comes and it's time to sow your seed, traction and weight will also be a consern but there is plenty of room to add weights on the 4wd rims inside and out, these machines have on them for tires what you call 'if' or increased flex tires and are designed to run low air presure for increased foot print for more traction to the ground, in a nutshell pulling 56 feet of cultivater behind tractor now, with double shoot tips spaced 12 inches apart, fertilizer tip goes 4 inches into the ground while seed is in the 1 inch region, x56, and your pulling a cart pull of fertilizer and seed behind that, that holds 550 bushels, so the reason why I am digging into seeing if any hp increases can be made is simple the newer bigger air drill is a lot bigger and I think twice as heave as this 56 foot air drill, so my reasoning comes down to this, this tractor runs a cm2350 x106 ECM, and it is well known that certain individuals have the capability to alter settings among other things, it's either try and tune it or possibly pay big $ to upgrade to the next size bigger hp tractor that has the identical tracter frame and transmission engine, the only difference the ECM cal,