Injector replacement didn't solve my issue, thoughts?

[gatow900]

(01-18-2017 )Hammerhead Wrote:  

(01-17-2017 )gatow900 Wrote:  I use a nail to pull my injectors and for the oil in the bolt holes I just screw the bolt by it self in to squeeze out the oil

gatow900, just to clarify, I assume you bend the nail at a 90* near the tip and insert it into the removing dowel hole and pull/lift to extract the injector from the bore.
Is that correct?

Sorry for late reply. I use the flat end and put it between the injector and the head and just pry slowly around the injector