Cm870 upgrades

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 11-24-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

Cm870 upgrades

01-22-2017, (Subject: Cm870 upgrades )

Post: #18

Hammerhead Offline

Offline

Kookoo for Cocoa Puffs (1922 Likes)

Posts: 1,400
Joined: May 2016

Thanks: 1014
Given 1922 thank(s) in 741 post(s)

RE: Cm870 upgrades

(01-21-2017 )Rawze Wrote: HELL NO! --- It is way too easy to mis-align or slightly bend a cooling nozzle,.. and then you have a LOT more problems.

That is just my own opinion any ways.

That's why I asked...I thought the piston cooling jets were plastic, how could you bend one? Or is the "nozzle" portion metal? edited to add: disregard, I went back and looked at the pics in the OP and I can see the metal part of the nozzle. Ignore me, brain fart!
So any rational ideas or thoughts for "inspecting" this to potentially prevent piston failure?

User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..."

Return to Top | find

Thanks given by:

« Next Oldest | Next Newest »

Messages In This Thread

Cm870 upgrades - Rig Wrench - 01-02-2017,

RE: Cm870 upgrades - Rawze - 01-02-2017,

RE: Cm870 upgrades - Rig Wrench - 01-02-2017,

RE: Cm870 upgrades - Hammerhead - 01-03-2017,

RE: Cm870 upgrades - Rawze - 01-03-2017,

RE: Cm870 upgrades - RPM1 - 01-03-2017,

RE: Cm870 upgrades - Hammerhead - 01-03-2017,

RE: Cm870 upgrades - Rig Wrench - 01-03-2017,

RE: Cm870 upgrades - Rawze - 01-03-2017,

RE: Cm870 upgrades - Rig Wrench - 01-19-2017,

RE: Cm870 upgrades - Hammerhead - 01-20-2017,

RE: Cm870 upgrades - Rawze - 01-20-2017,

RE: Cm870 upgrades - Rig Wrench - 01-20-2017,

RE: Cm870 upgrades - Running rough - 01-19-2017,

RE: Cm870 upgrades - Unilevers - 01-20-2017,

RE: Cm870 upgrades - Hammerhead - 01-20-2017,

RE: Cm870 upgrades - Rawze - 01-21-2017,

RE: Cm870 upgrades - Hammerhead - 01-22-2017

RE: Cm870 upgrades - 389driver - 01-23-2017,

RE: Cm870 upgrades - Hammerhead - 01-23-2017,

RE: Cm870 upgrades - Nilao - 01-22-2017,

RE: Cm870 upgrades - Hammerhead - 01-22-2017,

RE: Cm870 upgrades - Rig Wrench - 01-22-2017,

RE: Cm870 upgrades - Hammerhead - 01-22-2017,

RE: Cm870 upgrades - Rig Wrench - 01-22-2017,

RE: Cm870 upgrades - Rig Wrench - 01-22-2017,

RE: Cm870 upgrades - Rig Wrench - 01-22-2017,

RE: Cm870 upgrades - Hammerhead - 01-22-2017,

RE: Cm870 upgrades - Rawze - 01-22-2017,

RE: Cm870 upgrades - Rig Wrench - 01-26-2017,

RE: Cm870 upgrades - Rawze - 01-26-2017,

RE: Cm870 upgrades - Rig Wrench - 01-26-2017,

RE: Cm870 upgrades - Running rough - 01-27-2017,

RE: Cm870 upgrades - Rig Wrench - 01-28-2017,

RE: Cm870 upgrades - Rig Wrench - 01-27-2017,

RE: Cm870 upgrades - Hammerhead - 01-27-2017,

RE: Cm870 upgrades - Running rough - 01-27-2017,

RE: Cm870 upgrades - Marajin - 01-27-2017,

RE: Cm870 upgrades - Lostfarmboy - 09-08-2019,

RE: Cm870 upgrades - Rawze - 09-08-2019,

RE: Cm870 upgrades - Lostfarmboy - 09-08-2019,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design