Cm871 vs 2250/2350 |
01-31-2017, (Subject: Cm871 vs 2250/2350 ) Post: #4 | |||
| |||
RE: Cm871 vs 2250/2350 They have 3.55's. One has a 10 spd the others have 18's. I have read pretty extensively on the mm on other forums. Then when I found Rawze has his own I came here. I planned on keeping the dpf tuned up per Rawze specs at least as long as there is a warranty. Already been looking at bypass filters. No problem with getting dirty or spinning wrenches. Don't know about a def system haven't found the guide to them. BTW. How do I get to drink Conakry in the middle of the day | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Cm871 vs 2250/2350 - Rockycoon75 - 01-31-2017, RE: Cm871 vs 2250/2350 - Marajin - 01-31-2017, RE: Cm871 vs 2250/2350 - Rawze - 01-31-2017, RE: Cm871 vs 2250/2350 - Rockycoon75 - 01-31-2017 RE: Cm871 vs 2250/2350 - Rawze - 01-31-2017, RE: Cm871 vs 2250/2350 - Rockycoon75 - 01-31-2017, RE: Cm871 vs 2250/2350 - Rawze - 01-31-2017, RE: Cm871 vs 2250/2350 - Hammerhead - 01-31-2017, RE: Cm871 vs 2250/2350 - Rockycoon75 - 01-31-2017, RE: Cm871 vs 2250/2350 - Hammerhead - 01-31-2017, RE: Cm871 vs 2250/2350 - Rockycoon75 - 01-31-2017, RE: Cm871 vs 2250/2350 - Rawze - 01-31-2017, RE: Cm871 vs 2250/2350 - RPM1 - 01-31-2017, RE: Cm871 vs 2250/2350 - Rawze - 02-01-2017, RE: Cm871 vs 2250/2350 - Rig Wrench - 01-31-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.