Cm871 vs 2250/2350 |
01-31-2017, (Subject: Cm871 vs 2250/2350 ) Post: #5 | |||
| |||
RE: Cm871 vs 2250/2350 (01-31-2017 )Rockycoon75 Wrote: They have 3.55's. One has a 10 spd the others have 18's. I have read pretty extensively on the mm on other forums. Then when I found Rawze has his own I came here. I planned on keeping the dpf tuned up per Rawze specs at least as long as there is a warranty. Already been looking at bypass filters. No problem with getting dirty or spinning wrenches. Don't know about a def system haven't found the guide to them. make sure you look at the overhead cams before you commit. I had yet another truck here a few days ago that was all chewed up that a guy purchased. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Cm871 vs 2250/2350 - Rockycoon75 - 01-31-2017, RE: Cm871 vs 2250/2350 - Marajin - 01-31-2017, RE: Cm871 vs 2250/2350 - Rawze - 01-31-2017, RE: Cm871 vs 2250/2350 - Rockycoon75 - 01-31-2017, RE: Cm871 vs 2250/2350 - Rawze - 01-31-2017 RE: Cm871 vs 2250/2350 - Rockycoon75 - 01-31-2017, RE: Cm871 vs 2250/2350 - Rawze - 01-31-2017, RE: Cm871 vs 2250/2350 - Hammerhead - 01-31-2017, RE: Cm871 vs 2250/2350 - Rockycoon75 - 01-31-2017, RE: Cm871 vs 2250/2350 - Hammerhead - 01-31-2017, RE: Cm871 vs 2250/2350 - Rockycoon75 - 01-31-2017, RE: Cm871 vs 2250/2350 - Rawze - 01-31-2017, RE: Cm871 vs 2250/2350 - RPM1 - 01-31-2017, RE: Cm871 vs 2250/2350 - Rawze - 02-01-2017, RE: Cm871 vs 2250/2350 - Rig Wrench - 01-31-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.