Cm871 vs 2250/2350

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 11-24-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

Cm871 vs 2250/2350

01-31-2017, (Subject: Cm871 vs 2250/2350 )

Post: #7

Rawze

Offline

Forum Reject (14142 Likes)

Posts: 11,344
Joined: Jun 2013

Thanks: 6012
Given 14142 thank(s) in 6228 post(s)

RE: Cm871 vs 2250/2350

(01-31-2017 )Rockycoon75 Wrote: Yes sir. I has a deal made on a 09. Made them pressure check coolant, dyno, and pop the valve cover. Needed intake cam and overhaul so I'm back to shopping. Trying to be cautious and read and learn as much as I can. Just don't know much about the 2250/2350 stuff.

If you liked the rest of the truck, I would have taken it for $22,000 less. Then had it hand built and done right.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.

Return to Top | find

Thanks given by:

« Next Oldest | Next Newest »

Messages In This Thread

Cm871 vs 2250/2350 - Rockycoon75 - 01-31-2017,

RE: Cm871 vs 2250/2350 - Marajin - 01-31-2017,

RE: Cm871 vs 2250/2350 - Rawze - 01-31-2017,

RE: Cm871 vs 2250/2350 - Rockycoon75 - 01-31-2017,

RE: Cm871 vs 2250/2350 - Rawze - 01-31-2017,

RE: Cm871 vs 2250/2350 - Rockycoon75 - 01-31-2017,

RE: Cm871 vs 2250/2350 - Rawze - 01-31-2017

RE: Cm871 vs 2250/2350 - Hammerhead - 01-31-2017,

RE: Cm871 vs 2250/2350 - Rockycoon75 - 01-31-2017,

RE: Cm871 vs 2250/2350 - Hammerhead - 01-31-2017,

RE: Cm871 vs 2250/2350 - Rockycoon75 - 01-31-2017,

RE: Cm871 vs 2250/2350 - Rawze - 01-31-2017,

RE: Cm871 vs 2250/2350 - RPM1 - 01-31-2017,

RE: Cm871 vs 2250/2350 - Rawze - 02-01-2017,

RE: Cm871 vs 2250/2350 - Rig Wrench - 01-31-2017,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design