| cm870 needs a head (so I can get ahead) |
| 01-31-2017, (Subject: cm870 needs a head (so I can get ahead) ) Post: #8 | |||
| |||
RE: cm870 needs a head (so I can get ahead) (01-31-2017 )Starlight Wrote: ....but two pistons with the rings lined up as straight as an arrow.... Here we go again with piston rings "incorrectly" or should we say "ignorantly" installed. SAD Between this and MrHagg's report of the varying and unsqaure liners, I am utterly disgusted with the BRM! With their manufacturing facilities and capabilities, this should be considered unacceptable by the QC Dept! There is absolutely (and zero offense intended) no ####ing way that a shade tree guy like Rawze has to be called in to re-cut the block to set liners. Im not saying he shouldn't be that good at it, I'm saying the BRM should not be that inferior at it! User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..." | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
cm870 needs a head (so I can get ahead) - Redpower870 - 01-30-2017, RE: cm870 needs a head (so I can get ahead) - hhow55 - 01-31-2017, RE: cm870 needs a head (so I can get ahead) - Rawze - 01-31-2017, RE: cm870 needs a head (so I can get ahead) - Waterloo - 01-31-2017, RE: cm870 needs a head (so I can get ahead) - Redpower870 - 01-31-2017, RE: cm870 needs a head (so I can get ahead) - Starlight - 01-31-2017, RE: cm870 needs a head (so I can get ahead) - Rawze - 01-31-2017, RE: cm870 needs a head (so I can get ahead) - Hammerhead - 01-31-2017 RE: cm870 needs a head (so I can get ahead) - Redpower870 - 01-31-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.