Getting rid of mandate |
02-07-2017, (Subject: Getting rid of mandate ) Post: #4 | |||
| |||
RE: Getting rid of mandate (02-07-2017 )flonly Wrote: ok thanks . im in south florida but i am in a couple months going to do a complete inframe.Might just try to tke it to Mr.Hagg and do it all at same time. I had 1.5 million km on my engine and was 100% sure I needed a inframe asap. Lots of blowby. I demandated mine as a means to stretch out the inevitable. After the mandate took a hike, I was able to focus on pinpointing other issues. My turbo was boosting into the crankcase for starters. Fixed that and no blowby anymore. Did a bearing roll a while back and the sleeves and everything looked good, compression, mpg all good. Truck has 1.75 million km now and still runs like a champ! I'd suggest doing it asap, maybe your motor is better off than you think.... just don't go crazy on the hp if your unsure how sound your engine is. User's Signature: I'm no mechanic, I'm just a guy that breaks down enough to know a bit. | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
Getting rid of mandate - flonly - 02-07-2017, RE: Getting rid of mandate - Magard - 02-07-2017, RE: Getting rid of mandate - flonly - 02-07-2017, RE: Getting rid of mandate - Brock - 02-07-2017 RE: Getting rid of mandate - Hammerhead - 02-08-2017, RE: Getting rid of mandate - Brock - 02-08-2017, RE: Getting rid of mandate - Cuya - 02-08-2017, RE: Getting rid of mandate - flonly - 02-08-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.