Turbo position

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 11-28-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

Turbo position

02-10-2017, (Subject: Turbo position )

Post: #10

Rawze

Offline

Forum Reject (14146 Likes)

Posts: 11,348
Joined: Jun 2013

Thanks: 6014
Given 14146 thank(s) in 6232 post(s)

RE: Turbo position

(02-10-2017 )gatow900 Wrote:
(02-10-2017 )Rawze Wrote: At least it is not 80% at idle like from factory and sucking excess fuel because of it.
Yeah I know but just finished talking to Unilever's and he did set it to 18 on the last tune. I just didn't realize it until Saturday when I was going over everything on my truck. And because I have a 122,000 miles check engine light free. So everything is good.

I like to see them set so that there is no vacuum at the elbow pipe joint at idle.

http://rawze.com/forums/showthread.php?t...91#pid6591

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.

Return to Top | find

Thanks given by:

scottydogtruck , 386lover

« Next Oldest | Next Newest »

Messages In This Thread

Turbo position - gatow900 - 02-10-2017,

RE: Turbo position - Hammerhead - 02-10-2017,

RE: Turbo position - gatow900 - 02-10-2017,

RE: Turbo position - Signature620 - 02-10-2017,

RE: Turbo position - gearhead - 02-10-2017,

RE: Turbo position - gatow900 - 02-10-2017,

RE: Turbo position - Unilevers - 02-10-2017,

RE: Turbo position - Rawze - 02-10-2017,

RE: Turbo position - gatow900 - 02-10-2017,

RE: Turbo position - Rawze - 02-10-2017

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design