Problem after oil pump shim fixed
02-14-2017, (Subject: Problem after oil pump shim fixed ) 
Post: #4
RE: Problem after oil pump shim fixed
(02-14-2017 )Brock Wrote:  I haven't warmed it up all the way and drive it as I'm putting a pro ride on right now but before it acted up I believe I was around 30psi idle, 40psi 900rpm idle and I was cruising down the road between 50 and 60 somewhere, I believe it was closed to 50 when at full temp, 60 when the motor is cold.

I'd say 50psi at full temp is the max you'd want to go as you don't want to "wash" out your bearings.
replyreply
 Thanks given by: overshot


Messages In This Thread
RE: Problem after oil pump shim fixed - Starlight - 02-14-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.