Cm2250

[Squish099]

(02-19-2017 )scottydogtruck Wrote:  

(02-19-2017 )Squish099 Wrote:  It's sat for almost a full day with pressure tester on radiator lost less than 1 psi, and nothing in catch pan under egr cooler.. Back to square one..

Look at the front of the engine, there is a plug on the gearcase front (follow a straight line from the rear of the air compressor forward towards the radiator), remove the plug......that is where you "bar over" the engine. 3/4" breaker bar or torque wrench. You will need a cheater bar on the end of the breaker bar to give added torque to turn the engine, unless you are Samson!!!

Just my 2...

I seen that in the timing cover? but didn't know what it was.. Thank you..