cummins isx injector

[race7820000]

Well, I got it back together, I didn't read the responses in time. I used a bore brush? And a soft towel and cleanEd the cups .

I watched the videos that rawze made and this was my first injector swap, it was easier than I thought, I just took my time. I sprayed starting fluid in intake one time and it fired and ran like ass for a cpl min then smoothed out.

It does idle way smoother, runs ok, when i drove it the thing seems like it misses a little, the rpm will jump sporadically as it climbs rpms when you Hammer on it through the gears. . I need to pull a trailer so I can really tell.

It still has a vibration at a high rpm in nutural just sitting there.

One thing for sure the injectors were definitely factory and had issues.

Maybe I'm took picky when it comes to vibration.