HVAC from face to feet to defrose

[Crafter]

Here is an interesting one I can't figure out.b

My AC won't switch from defrost to face.. or face to feet.

This is what I did. I'll do my best to explain. I remember while changing out the blower motor I realized every time I disconnect the power lines to the actuators that move the flaps for face or feet and reconnect the power.. the motors on the actuators reset themselves to find position.

Now I took the wire that controls the face actuator and connected it to the feet actuator to make sure it's not the actuator. So the actuator works fine and the flap works fine, it's just I have no power signal going to one set of my wires. Could it be a fuse or am I missing something?

Could it be my controller unit is messed up? I appreciate all the advice. Thank you!