Potential FIRE issue in ProStar HVAC harness and Linear Power Module
02-26-2017, (Subject: Potential FIRE issue in ProStar HVAC harness and Linear Power Module ) 
Post: #4
RE: Potential FIRE issue in ProStar HVAC harness and Linear Power Module
Brock, that is the same problem I had with mine, same symptons, I thought blend door was stuck too, I even replaced the actuator! But nope, it was the harness overheating. I bet when you unplug the main HVAC harness from your blower motor you will find some signs of overheating. The new jumper/resistor should cure your problems, it has mine.
replyreply
 Thanks given by: Brock


Messages In This Thread
RE: Potential FIRE issue in ProStar HVAC harness and Linear Power Module - Waterloo - 02-26-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.