Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / Cummins ISM not reading boost correctly?

new reply
Cummins ISM not reading boost correctly?
02-28-2017, (Subject: Cummins ISM not reading boost correctly? ) 
Post: #30
in2trux Offline
HMR-Contrinbuting V.I.P.  (193 Likes)  *****

 		Posts: 479
Joined: May 2014
Thanks: 217
Given 193 thank(s) in 90 post(s)
RE: Cummins ISM not reading boost correctly?
I would get a pressure gauge on the surge tank to see what psi it's running at.
Loss of pressure or combustion intrusion could be causing in to run hotter.
Leaking headgasket could be pushing enough coolant into exhaust side of egr, coolor, that could explain excess moisture at delta p.

User's Signature: 2010 386 Pete CM871, 13 spd. 3.55
Return to Top | find
replyreply
 Thanks given by: Waterloo
new reply


Messages In This Thread
RE: Cummins ISM not reading boost correctly? - in2trux - 02-28-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication