Cummins ISM not reading boost correctly?

[Mikesuburban1]

So we hooked insite up to the truck and no codes so now im really getting frustrated. Ran egr and turbo test and both passed did cylinder cutout and everything was good . One thing i noticed is the suction line from the tank rubbed on the frame and took a good chunk out but no fuel leaking but could there be a pin hole in the line like microscopic but just enough to suck air? And if it was sucking air would it run crappy? Hard start? Also can anyone on here look up what my calibration should be? Right now its 06060011 my esn is 35179619