Cm2250

[Squish099]

(03-03-2017 )JMBT Wrote:  The Cummins manual says 4100 lbs is acceptable. I personally would not feel comfortable running mine if it lost that much, but that is what "mother Cummins" says is ok. Wow, only 5psi loss is awesome. I would think there would be more variance then that in the insite equipment doing the reading! I had 800 with my old three cylinder pump and it made no noticable difference in performance. 425 with the brand new pump I just installed, not reman, new. And my injectors passed the single cylinder test as well as the actual injector test on insite.

We did not do the cut out cause it easily passed the leak down.. Would have like to hear this 15L running on only 1 cyl.. I find it very interesting it will even run with the other five dead..