Cm2250

[overshot]

(03-02-2017 )Squish099 Wrote:  

(03-02-2017 )halfpint Wrote:  I have a check engine light coming on, and it says fuel rail pressure. Some days it may not come on at all, and sometimes maybe once or twice a day. You can stop and turn the ignition off and then back on and it will go off. When the light comes on it will derate power, until you turn the. Key off and then back on. I've changed fuel filter and fuel water separator filter. Anyone have any idea what my problem could be?

Which fuel pump does it have on it? I would be very careful with any cel dealing with fuel pressure.. The ceramic plungers go with little to no warning. Blowing ceramic shrapnel into the oil pan. Taking the mains and rods out along the way. 2 cyl fuel pumps have 4 Allen head bolts. 3 cyl have 8 hex head bolts. You can call dealer with the last 6 of you Vin and ask if the fuel pump campaign was ever completed, or if your truck was even included in it.

Don't ever take the dealers word on that. Mr. Hagg talked to cummins and peterbilt about mine. They both said " yes it's been updated". No it hadn't. A $20 gasket is cheaper than an $20000 engine. Check it yourself.