DUCK WING ANTENNA

[snailexpress]

(03-19-2016 )yamajason Wrote:  

(03-19-2016 )snailexpress Wrote:  If you are about this it was mine post. I'll give it a try this summer despite Rawze's critique. I have buddy working for (afraid to name) company with equipment allow to measure all antenna diagram and characteristic.

You could re-route the factory wires away from your antenna...or wrap the factory wires in Copper Foil Tape and attach the foil electrically to the truck ground, shielding the wires from inductive power spikes that could damage truck BCM, etc.
http://amzn.com/B018RDZ3HG

Not to many wires around. One harness to the top marker lights and one to in cab ceiling light. All other are far away. My goal is a clear reception not pumping power out.