Cm2250 vgt Turbo actuator problem

[CumminsFreak]

(03-07-2017 )Rawze Wrote:  Also check this...

the CM2250 Volcano ...

Any exhaust restriction will cause the turbo not to spin fast enough and make for lower than normal boost levels. A major boost leak can cause it too.

Thank you for the link and the response Rawze. We recently replaced the dosing injector, and there was a small, dime size hole right underneath the dosing injector that I welded and fixed. My guess is that the def filter is bad, when I took it out it was cracked right on the bottom and i think it is clogged and might be the cause of my problems.