Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / Egr cooler leaking externally?

new reply
Egr cooler leaking externally?
03-07-2017, (Subject: Egr cooler leaking externally? ) 
Post: #7
Rawze Offline
Forum Reject  (14143 Likes)  *******

 		Posts: 11,346
Joined: Jun 2013
Thanks: 6012
Given 14143 thank(s) in 6229 post(s)
RE: Egr cooler leaking externally?
Just follow the quickserv procedure and you should be fine. Be careful pulling it out and re-installing it, as the fins are very delicate. That is why they recommend using dowels for it so that it does not get damaged when sliding it in/out. Personally, with that many miles on it, I would replace it while it was out.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
 Thanks given by: Nilao
new reply


Messages In This Thread
RE: Egr cooler leaking externally? - Rawze - 03-07-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication