spring bushings "cluncking" when turning pete 587

[jasonlepak]

I've had the same problem lately with mine... And I think mine are so bad that it's causing my tires to wear badly.
I ordered mine through the dealer... Whom told me that my 2009 387 has "roller" bushings on the front springs - rear shackles... Which cost about $400 per side.

I'm currently replacing pretty much my whole front suspension minus the springs and axle.
I'll let you know if it fixes the noise while turning and hitting bumps.

I did read somewhere once upon a time that if you take a C-clamp and compress the two shackle brackets together fairly tight, and then loosen the hold down bolts and retighten them that it kinda temporarily fixes the problem for a while.
For the most part the washers between the brackets and the bushings/pins wear out the brackets and causes most of the play. So I've read anyway.