Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / Cummins ISC issues

new reply
Cummins ISC issues
03-23-2017, (Subject: Cummins ISC issues ) 
Post: #3
TDInewguy Offline
Established  (8 Likes)  **

 		Posts: 26
Joined: Mar 2017
Thanks: 7
Given 8 thank(s) in 6 post(s)
RE: Cummins ISC issues
Hey guys,

I pulled out two of the sensors and also measured the new sensor I bought.

They both read about 300k ohms at room temp and if I them just about glowing hot they read about 250 ohms.

They all react about the same way, but the #1 sensor was a but coated with soot... and was slower reaction time until I cleaned it.

Could that cause the issue with the check engine light?

Should I just replace the sensor and not try the cleaned one?


Attached File(s)Thumbnail(s)
   
Return to Top | find
replyreply
new reply


Messages In This Thread
Cummins ISC issues - TDInewguy - 03-12-2017,
RE: Cummins ISC issues - TDInewguy - 03-23-2017
RE: Cummins ISC issues - Rawze - 03-23-2017,
RE: Cummins ISC issues - Rawze - 03-25-2017,
RE: Cummins ISC issues - Rawze - 03-25-2017,
RE: Cummins ISC issues - Rawze - 03-26-2017,
RE: Cummins ISC issues - Rawze - 03-26-2017,
RE: Cummins ISC issues - Unilevers - 04-01-2017,
RE: Cummins ISC issues - Rawze - 04-04-2017,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication